Lace-in Laces – 13 Lacing Techniques with Instructions

Often, in addition to shoemaking model and upper material, the respective closure technique is neglected. Whether lacing, buckle or zipper ensures depending footwear and last shape for stability and comfort. Just the type of closure and the sole of the shoe are important for the body and can even alleviate discomfort.

As your threading laces , however, affects not only the personal well-being, but also the overall appearance.

Putting on shoelaces – What the locking technology reveals

The closure technique should be adapted to the respective shoe model. For a formal dress code in conservative business sectors, fashionable buckle closures or striking lacing can adversely affect the credibility of the wearer. A simple rule applies in general: the more formal the occasion, the simpler the shoelaces should be. Flat shoelaces are sporty and fit better to sneakers and sneakers. With round shoe bands in matching to the shoe color, you can definitely not go wrong.

Shoe laces – Classic parallel lacing

Especially in elegant leather shoes with few eyelets, such as Derby or Oxford, a simple binding is suitable. In the case of the parallel binding, the shoelaces extend horizontally between the sides and diagonally across the tongue. If the sides of the shoe do not cover the tongue completely, you will see the tape guide. They start at the lower end and thread the tape from above into the two holes. Pull the left end of the band diagonally through the second loop from below and then from above into the opposite loop. The right end of the band is then slanted obliquely into the opposing eye from below. Continue to the top.

Shoelaces – Classic zigzag

You can tie your boots in a kind of zigzag. In doing so, the two ends of the laces are alternately crossed. There is a regular and symmetrical picture, especially in shoes with many eyelets. Start normally at the lower end. The two ends should be the same length. Now thread alternately left and right, from bottom to top the two ends through the eyelets. Stay in the same rhythm and always pull the shoelaces in the same order – first left, then right, or vice versa.

Inserting the shoelaces – diagonal lacing

This technique for shoe binding looks elegant and simple, but also interesting and attracts attention. The method can be interpreted in two ways, since the shoelaces differ from the front and the inside. Start down when you slip the right laces through only one eyelet from above. One end should remain inside and the other one at the front. The inside guide you from below through the next eyelet on the same side, then diagonally into the next eyelet from above and once again from above diagonal. The end of the loop, which has remained at the front, thread from below through the first possible eye, then diagonally diagonally from above and further so.

Lace up the laces – center lacing

You can achieve a similar appearance, as with the parallel binding, with little effort. Begin as usual from below and pull the band ends from above through the first two eyelets. The one ending should be longer than the other. The exact length of the two laces depends above all on the number of eyelets. Finally, it may happen that you can bind the two differently long laces badly. Insert the shorter laces from below through the uppermost eyelet. The longer thread you from below slant through the next eyelet on the other side. Then drag it from the top into the parallel. So the shoes are laced for sale.

Laces – Crossing ‘Army’

At least six eyelets are required for this lacing technique. Now pull the laces through the first two eyelets from bottom to top and cross at the bottom side. Pass the lace up through the next eyelet and then onto the respective side in the top from above. Cross again on the lower side and proceed further.

Shoe laces – Straight lacing

With this lacing binding, the horizontal lacing only remains visible on the upper side. This elegant method has a particularly simple effect and does not occur at all. It is advisable to tie shoes that have a few eyelets and the binding does not matter to the stability of the shoe itself. Now, as usual, guide the laces through the first eyelets from the top downwards. The right laces first pull through the next eyelet, then left, through the opposite. Place the left laces on the inner side as far as the next free loop, leaving an eyelet and pulling upwards from the bottom. Then lace into the opposite eyelet from top to bottom, leave the eyelet over it and guide the same laces to the next eyelet.

Chucks tie – Creative tie patterns

The elaborately designed lacing is not suitable for smart business shoes, which are childish. Especially for sneakers, sneakers and chucks you can let off your creativity and try out many unusual lacing techniques. With a little practice you will surely master several ways you can tie your shoelaces differently.

Shoelaces – Alternating crossbuck

The cross-lacing works very similar to the zigzag variant. The difference is at the cruising. It happens front and inside, is also visible on both sides. Now start from below and guide the laces through the first eyelets from the top to the inside. Cross on the inner side and pull through the next eyelets from bottom to top. Now cross again, but this time on the upper side and pull the two ends of the laces through the respective eyelets from top to bottom. Keep going up to the top.

Shoelaces – Twisted lacing

This technique for binding laces is best suited for round tapes. Start from the inside to lace up and thread the two ends out through the first eyelet pair. Now cross the two ends in the center and turn them in so that the end of the end is on the same side. Then lace the inside out through the next eyelet and proceed to the end.

Lace up the laces – mesh lacing

In order to create this lace-up laces by itself, first start from the inside out and pull the laces through the first eyelet pair. Now cross the two ends of the laces and pull through the fourth ape on the opposite side. Then thread from the inside through the fifth eyepiece. You can do this with the two laces at the same time and these are now outside. Now slide the two ends downwards to the second eyelet on the same side. The left should be crossed with the right laces from the outside and once again guided inwards. From the inner side, each lobe is pulled further outwards through the third eyelet. Now the ends of the loops are guided again from the inside outwards through the last, the sixth eye.

Shoe laces – Star laces

A lacing for professionals is the star lacing. So laced your shoes securely pulls all your eyes on you. For this lacing you need shoes with at least six eyelets on each side. Start from above and take only one end of the loop. Follow the steps marked with numbers.

Creative tie pattern – Chess pattern with shoelaces in contrasting colors

Although the chess pattern looks really complicated, but it can not be reproduced at all. You need lace in two contrasting colors or shoelaces and satin ribbon in beautiful nuance, as in the example above. Just tie the poker sticks straight, as we’ve already indicated. Now take the second ribbon and lace alternately, but in the other direction – perpendicular.

Designer sandals for lacing – Dsquared2

Not just sneakers have shoelaces. Look at this model designer high heels from Dsquared2. Exciting or?